Share

VOL-32-4 PISTON FILLER

Model: VOL-32-4

Volumetric Piston Filler

Description:

Model VOL-32-4
 

Fills-All Model VOL-32-4 Fully Automatic Volumetric Piston Filler

Accurate to ±0.5%.Easily expandable from 2 to 24 nozzles.Fill volume range of 10-1 with single knob control. Fills free flowing to highly viscous liquids.

VOL-32-4 (can handle four of 36 oz., eight of 20 oz., 12 of all other pistons sizes)

Features:

THE MODEL VOL-32 VOLUMETRIC PISTON FILLER COMES EQUIPPED WITH THE FOLLOWING STANDARD FEATURES:

  1. No bottle-no fill.
  2. Stainless steel cabinet, one piece welded construction.
  3. Bottom-up fill or non-diving nozzles (adjustable).
  4. Totally programmed microprocessor control for repeatable and fast change-overs.
  5. Water tight Nema 4 control box.
  6. Independent adjustable trimming of pumps to fine-tune each piston.
  7. Dual speed controls giving separate adjustment capabilities for the aspirating and discharge strokes, depending upon products being filled.
  8. Portable on four heavy-duty swivel casters, complete with stainless steel leveling screws with floor pads.
  9. Left to right travel is standard.  For right to left travel, please indicate on your purchase order.
  10. Stainless steel nozzle rack fully adjustable for spacing of nozzles form 1 to 12 nozzles to accommodate virtually every container configuration.
  11. Stainless steel control box support-offset for easy access and simplified cleaning.
  12. Fill bottle counter to keep count of the number of bottles being filled in any given run.
  13. Automatic bottle indexing system-stainless steel construction completely adjustable-accommodates a wide range of container shapes and sizes.
  14. Air filter/regulator and air supply switch.
  15. Two-year guarantee on all parts, less tubing, seals and gaskets (electronics are covered under manufacturers guarantee).

Standard wiring is 110V, 1 Phase, 60 Hz air consumption is approximately 4-5 CFM at 90 PSI

Options:

  1.  For shipping purposes, the machine must be bolted to a heavy duty wooden skid for stability during transportation;  When the machine is shipped on a common carrier, the machine must be fully crated, the cost for the standard 4' x 8' x 6'7" high totally enclosed crate including the heavy duty skid is                                                                                                    
  2. 7’6” long stainless steel left to right conveyor drive, D.C. drive and electronic controllers, stainless steel rails                                                                                                                       
  3. FILLING UNITS (PISTON PUMPS):
  • 1 oz. (35 cc) * 316 stainless steel pumps                                                                                     
  • 3 oz. (95 cc) * 316 stainless steel pumps                                                                                     
  • 5 oz (150 cc) 316 stainless steel pumps, each extra                                                                    
  • 10 oz (300 cc) 316 stainless steel pumps, each extra                                                                  
  • 20 oz. (600 cc) 316 stainless steel pumps, each extra                                                                 
  • 36 oz. (1100 cc) 316 stainless steel pumps, each extra                                                                                                                                                                                                                      
  1. FILLING NOZZLES:
  • 316 stainless steel pneumatic closed tip nozzles, each extra                                                      
  1. All stainless steel construction 30 gallon supply tank on casters with twelve stainless steel outlets to go directly into pumps-includes ferrule for ball valves, extra (recommended)         
  2. Stainless steel tank cover                                                                                                             
  3. Stainless steel conveyor extension (if needed), extra per foot                                                    
  4. Multi-stroke electronic counter for multiple pumping (up to 10 times) if needed, extra Bottle neck clamping system (pneumatic-horizontal) for:
  • Up to four nozzles                                                                                                                                                                                                                                                                                
  • Up to eight nozzles                                                                                                                                                                                                                                                                              
  • Up to twelve nozzles                                                                                                                                                                                                                                                                            

Specifications:

Ideal For:

All viscous and highly accurate filling applications.  Excellent with viscous products.

The fillers offer accuracy, repeatability and ease of use with little or no changeover parts State-of-the-art components offer maximum performance, reliability and versatility to keep pace with your production requirements. FILLS-ALL fillers can operate separately or can be integrated into a complete packaging system.

 

Air-Electrical:

-110V, 1 Phase, 60 Cycle

- Air: 4-5 cu/ft per min.  90psi.

 

Size:

- Base Crated Weight: 850 lbs

- Crated Dimension: 8’x4’x6’9” W