PARTS ORIENTORS

---

Download Brochure

Feed systems parts feeders orient a wide range of cap sizes and types as well as small jars, containers, and various parts with its patented smooth and gentle operation.

Above: Model FSRF-24 Rotary Feeder (24" diameter)

Rotary Feeder Features:

• Model FSRF-24 and Model FSRF-36.
• No change parts required for standard caps and similar parts.
• Handles caps and parts from 8mm up to 120mm in diameter.
• Can orient jars and small containers.
• Quiet and gentle (non-vibratory).
• Stainless steel construction--ideal for pharmaceutical and food applications.
• One model cap feeder can handle standard, tall, child safety, pilfer evident and snap caps; both metal and plastic.
• Electronically controlled variable speed drive.
• Speeds from 10 to 800 parts per minute.*
• Compact size with high speed output.
• Minimum adjustments required for orientation of unusually shaped caps or parts.
• No skilled personnel required for fast changeovers. Eliminates costly downtime.
• Optional mobile floor stands, parts counters, stainless steel supply hoppers, stainless steel chutes and bulk parts elevators available.
• Guaranteed for 2 full years--the longest in the industry.
• Easily adaptable to KAPS-ALL® cappers.
• No belts or drive chains needed.
• Simple tooling available for unusual cap stylings and parts such as; tall spouts, snip tops, push-pull caps, etc.
• Precise dribble feeding from hopper not required, feeder is not load sensitive.
• Supplies caps/parts on demand only.

*Proportionate to size and type of cap/part.

How The Rotary Feeders Operate

The Feed Systems Rotary Cap and Parts Feeders have been designed with the knowledge of over

62 years experience in the packaging and orienting industry. With the Feed Systems Rotary Cap Feeders, the older techniques of vibration and belt assisted orienting have been completely eliminated. The Feed Systems Rotary Cap and Parts Feeders work by a patented innovative principle. A gentle rotation of the inner disk pushes the caps to the outside shelf of the feeder bowl. Once the parts are single-filed, they are oriented into the desired discharge position. This orientation can be accomplished by several methods such as: mechanical, pneumatic or electronically. Once oriented properly, the parts are discharged single-file from the side exit where they enter a discharge chute to their final destination.

Above: Mode FS-B Bulk Parts Elevator

Bulk Cap and Parts Elevator

Uniquely designed Bulk Parts Elevator for the feeding of Caps, Plugs, Dip Tubes, Aerosol Valves, Pumps, Bottles, Jars, andother similar parts.

Standard Features:

• All stainless steel chassis, hood and guards.
• Heavy duty construction--low cost.
• No change parts required.
• Electronic variable speed drive with dial control.
• Large five (5) cubic foot capacity stainless steel hopper.
• Adjustable stainless steel leveling screws with floor pads.
• FDA and USDA approved belting with molded cleats.
• NEMA 12 electrics and control box. No air required.
• Two-year guarantee--the longest in the industry.
• Stationary operation or easily moved from one position to another with mobile base and heavy duty swivel casters.
• Low maintenance cost with no skilled personnel required.
• Gentle product handling.
• Clear Polycarbonate dust cover over inclined belt.
• Wide range of height adjustments.
• Compact design for restricted ceiling heights.
• Easily integrated into KAPS-ALL machines or can be
  used independently.

Available options:

• Hazardous location controls and other special electrical requirements.
• Eight (8) and twenty (20) cubic foot hoppers to replace standard five (5) cubic foot hoppers.
• Hinged hopper covers.
• Stainless steel mobile base.

• Model FS-12 (Patented) Parts Escalator, Orientor, Feeder

  Special discharge heights.
• Clean-out door on hopper.

Model FS-12 (Patented) Parts Escalator, Orientor, Feeder

• Exclusive patented design, all stainless steel construction
• Feeds and orients standard flat caps and similary parts up to 120mm
• Handles child resistant and pilfer evident caps
• No exotic or expensive changeover parts needed
• Mounts directly on Kaps-All Cappers and feed into existing cap chute
• Can also be used with other existing machinery

Model Mini "L"--Parts and Cap Elevator/Hopper

Easy-load® small foot-print Cap and Parts Elevator that mounts directly onto Kaps-All Cappers or available with its own mobile floor stand for use with other exisiting machinery.

Parts and Cap Elevator/Hopper
Model Mini "L"